SigScribe4: Level Crossing Lever action modified

Check for the latest information about products and services.

Moderator: modadmin

Post Reply
User avatar
modadmin
Site Admin
Posts: 290
Joined: Thu Jan 15, 2004 9:41 am
Location: Australia

SigScribe4: Level Crossing Lever action modified

Post by modadmin »

A temporary fix for an error in the action of Level Crossing Levers has now been replaced with a permanent fix. This means that Level Crossing Levers will default to the 'normal' lever position which corresponds to the gates being locked. This fix is available at Build ID 950.

For any existing SigScribe4 designs that include Level Crossings, you will need to redefine any signal routes which pass over the level crossing.

[Edited to remove the word 'stop' from ' ... any stop signal routes ... ' as originally posted.]
All the best from "modadmin"
Forum Administration
MODRATEC
Post Reply