SigScribe4: Directly opposing signals error fixed

Check for the latest information about products and services.

Moderator: modadmin

Post Reply
User avatar
modadmin
Site Admin
Posts: 290
Joined: Thu Jan 15, 2004 9:41 am
Location: Australia

SigScribe4: Directly opposing signals error fixed

Post by modadmin »

A mistake in coding had allowed SigScribe4 interlocking errors when two stop signals were directly opposed on a single line section and one or more additional signals occupied the section between. This has been repaired at build ID 871 which is now available for download. If you wish to reuse an existing .ss4 file, clear each route definition and then redifine each route to overcome this problem.

Thanks to pathsearch for picking up this bug.
All the best from "modadmin"
Forum Administration
MODRATEC
Post Reply