Is it possible to fit electro-mechanical locks to the interlocking as in the "Released by Line Clear" or "Locked/Released by Track Curcuit **" requirements?
Dave M
Electro-mechanical Locks
Moderator: RedFred
In principle, yes, although we don't have a formal design at this stage. One possibility would be to utilise some of the tappets to be driven by solenoids/motors instead of by levers. With a bit of ingenuity, it should be possible to incorporate the required interlocking logic into the SigScribe4 design by providing "fake" devices with the appropriate locking requirements. For example, to emulate a "line clear", an unconnected FPL lever included when defining the route would do the job.
Other thoughts welcome.
Other thoughts welcome.
All the best from "modadmin"
Forum Administration
MODRATEC
Forum Administration
MODRATEC