MODRATEC Guest Lounge

Is it possible to fit electro-mechanical locks to the interlocking as in the "Released by Line Clear" or "Locked/Released by Track Curcuit **" requirements?

Dave M

Simular but different. I note that the interlocking frame is at 90 deg to the lever so that it operates in a push/pull direct line, therefore my request may not be possible. I wish the locking frame to be vertical, below the lever frame. This would require bell cranks (which I can make myself) but w...

Thanks Harold,

Just an NB. Must be able to connect to a Point or Signal lever.

Will now go and ask about the actual frame.

Dave M.

Yes, but that would invalidate the lever layout as the fouling bar was operated directly by the associated signal lever, and was not therefore within the box interlocking, but locked the signal lever by external mechanical means, in this case the weight of a wheel preventing the bar from raising. So...

I too have a need for this option but in addition on the diagram (Old Hill Jcn) I am working on there is also a FOULING RAIL which is operated in conjunction with a Starter Signal. It's purpose is to prevent the signal being cleared if any wheel is in the flangway close to and thereby obstructing th...